Article

Picking the Attachment Point: How to Set the Captive’s Retention

11/18/2026
Picking the Attachment Point: How to Set the Captive's Retention

Picking the Attachment Point: How to Set the Captive's Retention

Per-occurrence versus aggregate protection, and why loss volatility, not habit, should drive the decision

By Luke Renz, ACI

One of the very first questions to ask when evaluating captive viability should be the desired amount of risk the captive is to retain. If the risk tolerance is too low, the captive may not be the appropriate solution as the cost of reinsurance may essentially place the insured back in the commercial market. If the retention is too high, a single severe claim, or an unusually bad year, can consume surplus the captive spent years building.

Too often, the retention is set without much consideration: it mirrors the deductible program from the prior commercial program, it is the standard within a particular group arrangement, or it is whatever amount the reinsurance market quoted first. A better approach starts with the shape of the organization's losses and the captive's capacity to absorb them. This article walks through the core building blocks of retention design and the questions owners should ask before signing off on an attachment point.

The Building Blocks

Most captive programs are assembled from two core components. Each answers a different question about how much risk the captive should hold.

Per-Occurrence RetentionThe captive funds each loss up to this amount. Caps the cost of any single claim or occurrence.
Aggregate Stop-LossSits across the entire retained layer for the policy year. Caps the captive's total retained losses once they exceed the aggregate attachment.

Simplified illustration of how retention components fit together. Actual structures vary by line, reinsurer, and program.

  • Per-occurrence (specific) retention limits the captive's exposure to any one loss. It is the primary defense against severity: the large claim, the nuclear verdict, the total property loss.
  • Aggregate stop-loss limits the captive's total retained losses across the policy year. It is the primary defense against frequency: a year in which many individually modest claims add up to more than the captive planned for.

Per-Occurrence vs. Aggregate: Different Tools for Different Risks

Owners sometimes frame the choice as one or the other. In practice, most well-designed programs use both, and the real decision is how to calibrate each one relative to the captive's loss profile and capital.

Per-Occurrence Retention

Protects against: Severity. One claim that is far larger than anything in the loss history.

Most critical for: Lines with long tails and heavy-tailed outcomes, such as auto liability, general liability, and excess layers, where social inflation can push individual claims well beyond historical norms.

Key question: What is the largest single loss the captive could pay without impairing its surplus or its ability to pay other claims?

Aggregate Stop-Loss

Protects against: Frequency. A year in which ordinary claims arrive in greater numbers than expected.

Most critical for: High-frequency lines such as workers' compensation, auto physical damage, and property deductible programs, where no single claim is threatening but the total can swing meaningfully from year to year.

Key question: If retained losses come in well above expectations, how much of that overrun can the captive absorb before it needs to be capped?

The two protections also interact. A low per-occurrence retention trims the largest claims out of the retained layer, which reduces year-to-year swings and can make aggregate protection less necessary, or cheaper. A high per-occurrence retention leaves more large-loss volatility inside the captive, which makes a well-placed aggregate cap more valuable.

Read the Fine Print: Retentions and aggregates depend on definitions. Confirm whether allocated loss adjustment expense (ALAE) erodes the retention or is shared pro rata above it, how "occurrence" is defined for multi-claimant events, and whether the aggregate attachment is a fixed amount or a percentage of premium or payroll that adjusts at audit. Two quotes with the same headline retention can behave very differently in a loss.

Let Loss Volatility Drive the Choice

The right attachment point is not a universal number. It is a function of how predictable the organization's losses are and how much variability the captive can carry. Several factors should shape the decision:

  • Frequency and severity mix. A program with many small, predictable claims can typically support a higher per-occurrence retention, because the retained losses are statistically stable. A program with few claims but the potential for very large ones generally calls for a lower specific attachment. This is highly dependent of risk tolerance, however. Many severity based captives, (i.e. property captives) take a very large retention.
  • Credibility of the loss data. A long, consistent loss history with sufficient claim volume supports retaining more. Thin or inconsistent data means more of the expected loss is an estimate, and the retention should consider that uncertainty.
  • Tail length and development. Long-tail liability lines can develop for years after the policy period. Retentions on these lines should account for adverse development and the current litigation environment, not just historical paid losses.
  • Surplus and capital capacity. The captive's retained exposure, at a conservative confidence level, should be supportable by its surplus. As surplus grows, the captive can often move its retention up gradually.
  • Reinsurance pricing. The cost of each incremental layer of protection matters. When reinsurance is priced well above expected ceded losses, retaining more may be more efficient. When it is priced attractively, buying lower protection can be worth it.
  • Collateral requirements. In fronted programs, the fronting carrier will typically require collateral tied to the captive's retained obligations. Higher retentions generally mean greater collateral needs, which should be part of the cost comparison.
Retention Approach Reinsurance Cost Retained Volatility Surplus & Collateral Needed Often a Fit For
Lower attachment Higher Lower Lower Newer captives, thin capital, severity-driven lines, limited loss data
Moderate attachment with aggregate cap Moderate Moderate, capped Moderate Established captives with credible loss history and mixed frequency/severity exposure
Higher attachment Lower Higher Higher Well-capitalized captives with stable, high-frequency losses and a long track record

Directional comparison only. The appropriate structure depends on actuarial analysis of the specific program.

A Practical Process for Setting the Retention

1

Separate frequency from severity in the loss runs

Review losses capped at several candidate retention levels and identify the large losses that drive results. This shows how much of historical cost sits in the working layer versus the occasional large claim.

2

Model retained losses at multiple attachment points

Ask the actuary to project expected retained losses and the range of outcomes at each candidate retention, including results at higher confidence levels, not just the expected case.

3

Stress-test against surplus

For each option, compare an adverse-year retained loss to the captive's surplus. The structure should leave the captive solvent and compliant with domicile capital requirements even in a poor year.

4

Price the marginal layer

Compare the reinsurance premium saved by moving the retention up against the additional expected losses and volatility the captive would take on. Factor in collateral and fronting costs alongside reinsurance pricing.

5

Revisit every renewal

A retention that suited a first-year captive may be too conservative once surplus has grown, and one that suited a soft reinsurance market may be expensive in a hard one. Treat the attachment point as a decision to re-examine each year, not a fixed feature of the program.

Common Missteps

  • Carrying over the old deductible. The prior commercial deductible reflected the carrier's pricing and appetite, not the captive's capital and objectives.
  • Ignoring aggregate exposure. A comfortable per-occurrence retention can still produce an uncomfortable year if many claims land inside it.
  • Relying on historical averages for long-tail lines. Liability retentions set using loss experience from a different litigation era may understate today's severity.
  • Comparing quotes on headline numbers alone. Differences in ALAE treatment, occurrence definitions, and aggregate mechanics can outweigh differences in the stated retention.

There is no single correct attachment point. The right retention is the one that keeps predictable losses inside the captive, transfers the volatility the captive cannot comfortably absorb, and does both at a reasonable total cost. Per-occurrence retentions manage severity, and aggregate protection manages frequency. Getting the balance right requires credible loss data, sound actuarial analysis, and a willingness to revisit the structure as the captive matures.

Evaluating Your Captive's Retention Structure?

C.I. provides AM Best-rated fronting paper for captive programs and works alongside your broker, captive manager, and all other service providers to structure retentions and reinsurance that fit your loss profile and capital.

Reach out to C.I. today for a no-cost evaluation of your program.

info@captives.insure
Start Building